Demulsifying fully-synthetic industrial gear oils withelevated aging resistance, excellent load-bearingcapacity and wear protection. RENOLIN UNISYN CLPoils have good resistance to micropitting. Reliablelubrication of roller bearings is confirmed by the goodresults of the FE8 testing. The products are preferablyused when increased requirements are set for high andlow temperature usage limits. In gearboxes andrecalculating systems with sump temperatures up to90°C, oil-change intervals that are longer incomparison to previous mineral oils are achieved.Miscibility with gearbox oils based on mineral oil isgenerally achieved, which means that simplifiedconversion is possible. ApplicationThe oils of the RENOLIN UNISYN CLP series are usedfor all applications in industry where a synthetic oil ofthe CLP type according to DIN 51 517-3 isrecommended by the manufacturer. Highly-stressedbearings, joints, pressure screws, spur gears and wormgears can be reliably, safely and economically suppliedeven with short-term peak temperatures up to 150°C. SpecificationsThe products meet and in many cases exceed the requiements of- DIN 51 517-3CLP - ISO 6743-6CKC - AISE 224 - AGMA 280.04 - David Brown S1 53.101 The RENOLIN UNISYN CLP series are approved for example byA. Friedrich Flender AG, 46393 Bocholt (2/1/02) Jahnel-Kestermann, Bochum (2/21/03) Advantages Low foami ng Good air release capacity Very good aging resistance Good corrosion protection Excellent viscosity-temperature behavior Very good wear protection Multigrade character Miscible with mineral and ester based gear oils Lifetime lubrication possible High natural VI (viscosity index) Typical Technical DataProduct name 68 100 Properties ISO VG 68 100 DIN 51 519 Kinematic viscosity at 40 °C at 100 °C mm2/s mm2/s 68 10.8 100 14.4 19.4 DIN 51 562-1 Viscosity index - 149 148 DIN ISO 2909 Density at 15°C kg/m³ 843 845 849 Color index ASTM 0.5 0.5 0.5 Flash point in open cup acc. to Cleveland °C 240 250 Pour point °C -60 -60 -57 DIN ISO 3016 Neutralization number mgKOH/g 0.6 0.5 0.6 DIN 51 558-1 FZG A/8,3/90 Failure load stage 12 12 12 FZG A/16,6/140 Failure load stage 12 12 12 FZG-GFT Test GT-C/8,3/90 graduated test Failure load stage GFT high GFT high GFT high FVA Information Sheet no. 54/I-IV FZG-GFT Test GT-C/8,3/90 Failure load stage GFT high GFT high GFT high FVA Information Sheet no. 54/I-IV Product name 320 460 680 ISO VG 320 460 680 DIN 51 519 25.7 320 36.6 460 45.6 680 62.2 DIN 51 562-1 162 155 DIN ISO 2909 Density at 15°C 852 853 856 858 Color index ASTM 0.5 0.5 0.5 0.5 Flash point in open cup acc. to Cleveland 260 260 300 300 -54 -54 -45 -42 DIN ISO 3016 mgKOH/g 0.6 0.6 0.6 0.6 DIN 51 558-1 FZG A/8,3/90 Failure load stage >12 >12 >12 >12 FZG A/16,6/140 Failure load stage 12 12 12 12 FZG-GFT Test GT-C/8,3/90 graduated test Failure load stage GFT high GFT high GFT high GFT high FVA Information Sheet no. 54/I-IV FZG-GFT Test GT-C/8,3/90 Failure load stage GFT high GFT high GFT high GFT high FVA Information Sheet no.