N series Planetary gear units

Big size motors are suitable for connecting with gear boxes to reach rated power and the max torque. Low speed shaft and high speed shaft are able to run with heavy load.

Solid shaft with a flat key and a screw hole (Type≤353);
Solid shaft with two flat keys and three screw holes(Type≥354);
external splines shaft with location shaft shoulder
internal spline
Hollow shaft with power lock
Products and parts modularized;
Low speed bearing;
200-280-----double-row tapered roller bearing
353-695-----self-aligning roller bearing and deep groove ball bearing;
ductile iron case, thick wall and  reinforcement
Mineral oil or synthetic oil lubrication, oil fill plug, oil window plug and drain plug

Gear stage

  Coaxial type 1,2,3,4 stage planetary transmission
  Angle 1 stage helical bevel gear combination 1,2,3 stage planetary transmission;
  Materials: external gear 20CrMnTi
              internal gear 42CrMo
  cylindrical gear grinding
  swimming planet carrier is a steel part
  High speed and low speed shaft of coaxial and angle type are both able to rotate
  deasil and anticlockwise
  gear load capacity is checked and calculated by anti-pressure and  transverse
  rupture strength, maximum instantaneous power has passed validation. Motor     introduction

  standard design
  Motors are designed by IEC standard
  Three phase asynchronous motor, closeness, air blast cooling, squirrel-cage;
  Frequency: 50HZ;
  Voltage: size smaller than 132 220/380V+-10%;
  Voltage: size bigger than 132 380/660V+-10%;
  Protection class IP54,insulation class F;
  Continuous duty S1, the highest ambient temperature 40°C, the max sea level
  elevation 1000M;
  The max load could not more than 1.6 times the rated load,
  

  break motor
  IEC standard
  Reinforced case has better rigidity to reduce break noise;
  Direct current brake coil could be connected through rectifier module and also
  could  be connected with power directly
  Braking torque is proportional to motor torque and it could adjust the clearance between brakepads;
  Start frequently;
 Fast and precise breaking; 
  Breaking motors are supplied without manual release lever, please note in the
  contract if you need.
  Manual release lever will reset automatically after releasing lever;
  other instructions please refer to professional handbook or specification
  Serve with transducer
  Permissible frequency range of common motor: 20HZ-60HZ;
  Break coil of breaking motor should be supplied power independently.
  Usage for breaking motor special designed for variable frequency please refer to specification