1; Ultra Bright Torch: In need of using this function, switch "10" on and hold control "7" which is shown in the diagram;

2; 5.3V charging socket for digital cameras, MP3 MP4, PDA, iPod, PSP, Bluetooth etc. Digital products: If you need to charge any digital devices that require input voltage around 5V, simply insert the red plug side of the adjustable cable into socket "2" and connect the other side to the corresponding adaptors for different devices, then turn on the main switch shown as "10". Now you can see it's charging. Normally it takes 45mins to an hour to fully charge mobile phones, digital cameras, it all depends on the device charging characteristics and battery capacity.

4; 4.2V charging socket for digital cameras, MP3 MP4: This socket is for charging the devices that require input voltage between 4.2V-4.5V, it's suitable for some digital cameras, MP3 MP4. When charging is needed, select the special adjustable cable (optional), insert the yellow plug into socket "4"and connect the black socket with the corresponding adaptors. Switch "10" on to start charging.

5; Laser Pointer: Switch on "10", press and hold button "8" to use laser pointer. Stop using by release it.

6; Ultra-Violet Money Note Tester: Switch on the main power switch, press and hold button "9" to use UV money note tester, apply the light on the money note where has the UV reflection surface, if the reflection is bright and clear it means the note is genuine, vise versa. This function is only suitable for notes not coins. Stop using by release the button "9".

7; Ultra Bright Torch Button;

8; Laser Pointer Button;

9; Ultra-Violet Money Note Tester Button;

10; Main Power Switch ( up is 'ON', down is 'OFF');

11; Energy Indicator Button: Press and hold button "11", White light indicates full energy, Amber light indicates half-full, Red light shows energy level is low;

12; Changeable Attachment Switch;

13; Control Button for Changeable Attachment: When switch "12" is 'ON', press and hold "13" to run e attachment continually (mainly use for Electric Shaver and Stun Device, etc. );

14; Lock for changeable attachment;

15; Changeable Attachment Port: When other changeable attachments are needed, hold the attachment lock down and push the attachment part to the opposite direction of the shown arrow. Vise versa to take it off.

* Make sure the switch "12" is off before put on or take off any changeable attachments for safety purpose.

16; Compass: Please separate the compass part from the main unit if you need an accurate reading.

17; Energy Level Display Window.

Relevant Parameters:

Standard Outputs:

Output Voltage: 4.2V (stable voltage), output current 1000mA (for digital cameras, MP3 MP4);

Output Voltage: 5.3V, output current 1, 000mA (for all types of models mobile

Phones, digital camera, MP3/MP4, iPod, PDA, PSP, Bluetooth earphones, etc. )

Additional Attachment Outputs:

Attachment Terminal Output Voltage: 3.7V (linear), maximum output current = 3000mA(designed for high voltage, big current device, e. G. High voltage stun device, electronics shaver etc. );

Output Voltage: 8.4V (stable voltage), output current 1500mA (for digital video cameras those require 8.4V input);

Output Voltage: 12V (stable voltage), maximum output current 1500mA (for some iPod those require 12V input);