TM-G404 LED drive series is a special design for high power LED street lights, which is isolation static sonatant current power, which meet CE EMC test requirement(conduction, radiation), high power factor, efficient, wide input voltage range. It development in line with CE, EMC testing requirements (conduction, radiation), high power factor, high efficiency, wide input voltage range. It adopted a bran-new isolation circuit design, so that products are low-noise, energy saving, no-polluting, extended life and so on.

Out power: Vin=220V Top=27degree
Input voltage: Vout=22V Iout=2.5A Top=27degree
Voltage range: 185~265V
Output current: Vin=220V Top=27degree Vout=22V 2.5A
Work temperature: 25degree
Life: 60000hrs
Dimension: : L*W*H=135mm*65mm*37mm

Remark1: When installing the power supply, please note the right way of wiring the input and output side;
Remark2: In order to avoid burning out the LED, please connect DC output first then turn on the power supply;
Remark3: When using this product, please pay attention to high-pressure safety, and do a good job in anti-shock measures. Avoid metal short-circuit when installing.

Non-normal phenomenon and relative disposal method:
1. The power dose not shine or other corresponding phenomena when device connected, please cut off AC input, check DC output to make sure whether exist any bad places;
2. Device connected and LED light shine, however, the output is abnormal, please cut off AC input and check DC output,
A): Any overload or light load;
B): Power design parameters and the actual use do not match.
3. Any questions when use please contact us, feedback bad news, enable us provide better products and service.