USING INSTRUCTION (LCD LOCK)

Preface

Insert the battery box together with an emergency battery, the display automatically scans to see whether it displays more or less strokes, after scan it will show"ALL READY", then enter low-power sleeping state, after this show 00-01-01 (years, month, day) and 00: 00 (hours, minutes) for loge time. Input the factory password "666666", press the "# "button to /confirm/i, the display shows "OPEN", then open the door.

1. Coding
A, Personal password: Input1-8digit password, press"#"button to /confirm/i. Press the "* " button, when the display show "OPEN", display shows "--------", and then enter the 1-8 password, press"#" to /confirm/i, the disply show "INTO".
B, Emergency password: Input1-8digit password, press"#"button to /confirm/i. Press the "* " button, when the display show "OPEN", display shows "--------", enter the 1-8 password, the disply show "INTO".

2. Openning the door
A, Personal password: Press the "#" button, input the 1-8 password, press"#" button to /confirm/i; If the password is correct, the display show "OPEN", otherwise show "ERROR", Please re-enter your password.
B, Emergency Password: Press the"#" button, input the 8-bit password, press "#" button to /confirm/i; If password is correct, the display show"OPEN", emergency solenoid pull-in, or show" ERROR", Please re-enter your password.
C, Reset: Press the red button, personal password and the emergency password were restored to the factory password "666666" and" 88888888".

3. Auto-lock keypadInput the incorrect password three times, the keyboard will be locked automatically, but five minutes later it will be automatically removed.

4. Under-voltage directives
When the battery voltage is low, lower-right corner displays a battery symbol is displayed as "----", indicating the battery voltage has been inadequate, please replace the battery as soon as possible.

5. Clock Set
In a static, press the "*" button, a flashing display "--------" first, at this time press the "0" or "8" button to set, press the "#" button to mobile the flashing bits, press the "#" button for confirmation after setting end.

6. Display blanking
Press the "#" button before enter the password, then press the "*" button, then enter the password, the password will be displayed by "mouth".

7. Delete the wrong code:
In the process of entering the password, you can press the "*" button to delete characters.