Brand:-
Model:-
MOQ:-0 -
1.75mm PLA 3D Printer Filament For 3D Pen Printer Printing / Plastic Consumables
Quick Detail
1 Specifications:1.75&3.0.
2, Manner and packing: use vacuum package
3, Foreign 3d printer supplies perfect support the PLA, PLA belong to biological materials, corn grain refining, natural color can be solution, dose not affect the environment.
4, PLA material have hard, the strength and stiffness high
5, Surface light, smooth degree is very good.
6, Processing and no smell.
7, PLA print not curly and no edge warp.
8. Working temperature is low, 200°C -250°C.
9. Many color you can choose.
10. Variable Temperature PLA print strips change color temperature is 31 degrees
Product Detail:
| Diameter | 1.75mm |
| Weight | 15g/pcs |
| Color | black ,white ,grey , golden , silver , red , orange ,yellow , green ,blue , purple , pink ,fluorescein red,fluorescein green , fluorescein blue , fluorescein yellow , fluorescein orange , sky blue ,skin-color ,transparent , olive green. |
| Length | 5m /roll |
| model NO. | PLA |
| Dimensional accuracy | ± 0.1mm |
| packing | based on customer's request |
| usage | for 3d printer printing |
| Quality | Grade A |
| Gross weight | 20G /pcs |
Advantage:
Storage
PLA - PLA responds somewhat differently to moisture, in addition to bubbles or spurting at the nozzle, you may see discoloration and a reduction in 3D printed part properties as PLA can react with water at high temperatures and undergo de-polymerization. While PLA can also be dried using something as simple as a food dehydrator, it is important to note that this can alter the crystallinity ratio in the PLA and will possibly lead to changes in extrusion temperature and other extrusion characteristics. For many 3D Printers, this need not be of much concern.
Smell
PLA - PLA on the other hand, being derived from sugar gives off a smell similar to a semi-sweet cooking oil. While it certainly won't bring back fond memories of home-cooked meals, it is considered by many an improvement over hot plastic.
Part Acuracy:
PLA - Compared to ABS, PLA demonstrates much less part warping. For this reason it is possible to successfully print without a heated bed and use more commonly available "Blue" painters tape as a print surf
