Brand:-
Model:-
MOQ:-0 -
Purple Rapid Prototyping 1.75MM PLA 3D Printer Filament For 3D printer Pen
Description:
PLA (Polylactic acid) is thermoplastic aliphatic polyester made of renewable resources like corn or starch. Its extrusion-temperature is much lower than ABS, and most often doesn’t require a heated bed. PLA is a material that reduces the chance of the separate layers of your print to split.
3D printer is also known as rapid prototyping. It is already widely used in health care, education, toys, building, automobile, electronics, and anime field. PLA Filament is commonly used in 3D printing, has the following characteristics:
1. Good toughness high strength, high stiffness
2. No block nozzle, good stick hot bed, a smooth PLA used
3. Can be processed at 185 degrees
4. Low shrinkage, thermoforming dimensional stability
5. Accurate diameter: 3.0/1.75mm, variations + /-0.1mm,roundness +/-0.05mm;
6. Suitable for a variety of 3D printer, Makerbot, UP, Cubify, Leapfrog, Reprap, Ultimaker, Mendel, Prusa, Huxley, BFB series, etc.
Product Detail:
| Diameter | 1.75mm |
| Weight | 15g/pcs |
| Color | black ,white ,grey , golden , silver , red , orange ,yellow , green ,blue , purple , pink ,fluorescein red,fluorescein green , fluorescein blue , fluorescein yellow , fluorescein orange , sky blue ,skin-color ,transparent , olive green. |
| Length | 5m /roll |
| model NO. | PLA |
| Dimensional accuracy | ± 0.1mm |
| packing | based on customer's request |
| usage | for 3d printer printing |
| Quality | Grade A |
| Gross weight | 20G /pcs |
Applicable models: Suitable for Markerbot, RepRap,Cubify and UP 3D Printer.
Quality Control :
1, All of Our 3D Printer Filament are 100% virgin material, never use recycled material or regrind material, and all had achieved the latest REACH certificate.
2, Before the mass production, our engineer always do the test to make sure that sure that each batch of new raw materials must be printed by 3D printer.
3, The Laser diameter runs automatically to control the diameter of the filament and keeps it in a right range of 1.75 / 3.0mm, and our engineer will adjust it immediately when it alarms&nbs
