rkind other electrical and electronic products, mainly electromagnetic interference shielding or isolation or infinite waves of conductive fabric packing tape when used in high-frequency transmission and storage Notes 1, conductive fabric When packing tape at low magnetic state of the natural environment must be used packing tape needs to be warmed to room temperature (about 20 ℃) ??more than three hours using a .2, conductive fabric products packing tape to wrap film packaging or receive completed and installed in .3 appropriate cartons, packing tape conductive cloth should be placed in a cool place, avoid high temperature or high humidity. Quality assurance is between six months after production. Lithium battery termination packing tape acetate cloth glass cloth packing tape packing tape packing tape Goldfinger DuPont NOMEX fire polyimide packing tape packing tape Teflon packing tape

??????????????????????????We are more concerned about how to use 3Mpacking tape, of course, is very simple to use, but how to more effectively bonding products? Divided into the following steps to introduce: 1. For best results, the surface must be clean and dry. General recommendations cloth dampened with a 1: 1 ratio of the IP (IsopropylAlcohol isopropyl alcohol) with a mixture of water, wipe the surface clean post until the surface is completely dry. (Note: Before using IPA, please reference this solvent is recommended precautions). 2. The 3mpacking tape affixed to the surface, in order to drum or other means (scraper) to impose an average of about 15psi (1.05 公斤 / cm2) of pressure, making it an effective fit. 3. Follow 3mpacking tape from the point to the line to face contact surface fitting way of bonding. Fit artificial way, using a plastic scraper or roller, a solid and uniform pressure g